detection.wiki

Intel-iaLPSS2-GPIO2

EventTitleChannelSampleRule
1001ERROR: ERROR - STATUS: STATUS.DebugNN
1002INFO.DebugNN
1003[.DebugNN
1004[Message] -<--.DebugNN
1005[Message] -<-- Status = Status.DebugNN
1011DriverEntry StartPerformanceNN
1012DriverEntry EndPerformanceNN
1013Driver ERROR: WdfDriverCreate() returned status:Status.DebugNN
1014Driver ERROR: GPIO_CLX_RegisterClient() returned status:Status.DebugNN
1015DriverUnload StartPerformanceNN
1016DriverUnload EndPerformanceNN
1017Driver ERROR: GPIO_CLX_UnregisterClient() returned status:Status.DebugNN
1018Driver ERROR: CheckSupportedOs() returned status:Status.DebugNN
1021DeviceAdd StartPerformanceNN
1022DeviceAdd EndPerformanceNN
1023Device ERROR: GPIO_CLX_ProcessAddDevicePreDeviceCreate() returned status:Status.DebugNN
1024Device ERROR: GPIO_CLX_ProcessAddDevicePostDeviceCreate() returned …DebugNN
1025Device ERROR: WdfDeviceCreate() returned status:Status.DebugNN
1026Device HW profile FOUND: Instance:Device_HW_profile_FOUND_Instance …DebugNN
1027Device HW profile ERROR: Instance:Device_HW_profile_ERROR_Instance …DebugNN
1031GpioCx DDI: GpioCx_DDI.DebugNN
1032GpioCx DDI ERROR: Controller Context invalidDebugNN
1033GpioCx DDI ERROR: Controller Object invalidDebugNN
1034GpioCx DDI ERROR: Controller Object allocate errorDebugNN
1101ERROR: Invalid bank number: ERROR_Invalid_bank_number.DebugNN
1102BankName: ERROR: Invalid pin number: PinNo.DebugNN
1103BankName_PinNo: ERROR: Invalid pin ownership: PinOwnership.DebugNN
1104BankName_PinNo: ERROR: Invalid pin mode: PinMode.DebugNN
1107PrepareController StartPerformanceNN
1108PrepareController EndPerformanceNN
1109PrepareController ERROR: Can't allocate pin tableDebugNN
1110PrepareController ERROR: Can't initialize GPIO layout - STATUS:Status.DebugNN
1111PrepareController MBARLEN mapped: PA:VA LEN:MBAR VA:PA.DebugNN
1112PrepareController ERROR: Too many MBAR resources IDX:MBAR PA:PA LEN:LEN - …DebugNN
1113PrepareController ERROR: Can't map MMIO for MBARLEN PA:STATUS LEN:MBAR - …DebugNN
1114PrepareController INTERRUPT VEC:PrepareController_INTERRUPT_VEC.DebugNN
1115PrepareController ERROR: Incorrect resource count.DebugNN
1116ReleaseController StartPerformanceNN
1117ReleaseController EndPerformanceNN
1118Controller queried for propertiesDebugNN
1119Controller startedDebugNN
1120Controller stoppedDebugNN
1121BankName_PinNo: ERROR: Interrupt configuration not supported: IntMode …DebugNN
1122BankName_PinNo: Interrupt configured to: IntMode IntPolartity.DebugNN
1123BankName_PinNo: WARNING: Pull configuration not supported: PullMode - using …DebugNN
1124BankName_PinNo: Pull configured to: PullMode.DebugNN
1125BankName_PinNo: Interrupt enabled.DebugNN
1126BankName_PinNo: Interrupt disabled.DebugNN
1127requested: Interrupts mask set to:failed (requested:BankName, failed:MaskSet).DebugNN
1128BankName_PinNo: Interrupt unmasked.DebugNN
1129raw: Interrupts queried active:mask (raw:BankName, mask:Active).DebugNN
1130BankName: Interrupts queried enabled:Enabled.DebugNN
1131requested: Interrupts status cleared with mask:failed (requested:BankName, …DebugNN
1132BankName_PinNo: ERROR: Pin already connected in mode PinIoMode.DebugNN
1133BankName_PinNo: ERROR: Pin not connected.DebugNN
1134BankName_PinNo: Pin output set PinState.DebugNN
1135BankName_PinNo: Pin output pre-set PinState.DebugNN
1136BankName_PinNo: Pin input get PinState.DebugNN
1137BankName_PinNo: WARNING: Pin mode 'PinIoMode' not supported.DebugNN
1138BankName_PinNo: Pin connected in mode PinIoMode.DebugNN
1139BankName_PinNo: ERROR: Pin connected in mode PinIoModeCurrent while disconnect …DebugNN
1140BankName_PinNo: Pin disconnected - output buffer disabled.DebugNN
1141BankName_PinNo: Pin disconnected - output buffer left enabled.DebugNN
1142BankName_PinNo: Pin disconnected - input buffer disabled.DebugNN
1143BankName_PinNo: Pin disconnected - input buffer left enabled.DebugNN
1144BankName_PinNo: WARNING: Pin mode 'PinIoMode' not supported.DebugNN
1150BankName_PinNo: Pin context restored.DebugNN
1151BankName: Bank context restored.DebugNN
1152BankName_PinNo: Pin context saved.DebugNN
1153BankName: Bank context saved.DebugNN
1200ERROR: Invalid special function numberDebugNN
1201BankName_PinNo: Mask APIC interrupt.DebugNN
1202BankName_PinNo: Unmask APIC interrupt.DebugNN
1203BankName_PinNo: WriteGpioIo.DebugNN
1204BankName_PinNo: ReadGpioIo.DebugNN

Event ID 1001: ERROR: ERROR - STATUS: STATUS.

#
Channel
Debug
Opcode
Info

Message #

ERROR: %1 - STATUS: %2

Fields #

NameDescription
Message UnicodeString
Status UInt32NTSTATUS reference

Event ID 1002: INFO.

#
Channel
Debug
Opcode
Info

Description

INFO: Message

Message #

INFO: %1

Fields #

NameDescription
Message UnicodeString

Event ID 1003: [.

#
Channel
Debug
Opcode
Info

Description

[Message] -->

Message #

[%1] -->

Fields #

NameDescription
Message AnsiString

Event ID 1004: [Message] -<--.

#
Channel
Debug
Opcode
Info

Message #

[%1] -<--

Fields #

NameDescription
Message AnsiString

Event ID 1005: [Message] -<-- Status = Status.

#
Channel
Debug
Opcode
Info

Message #

[%1] -<-- Status = %2

Fields #

NameDescription
Message AnsiString
Status UInt32NTSTATUS reference

Event ID 1011: DriverEntry Start

#
Channel
Performance
Task
iaLPSS_GPIO2Driverroutines
Opcode
Start

Event ID 1012: DriverEntry End

#
Channel
Performance
Task
iaLPSS_GPIO2Driverroutines
Opcode
Stop

Event ID 1013: Driver ERROR: WdfDriverCreate() returned status:Status.

#
Channel
Debug
Task
iaLPSS_GPIO2Driverroutines

Message #

Driver ERROR: WdfDriverCreate() returned status:%1

Fields #

NameDescription
Status UInt32NTSTATUS reference

Event ID 1014: Driver ERROR: GPIO_CLX_RegisterClient() returned status:Status.

#
Channel
Debug
Task
iaLPSS_GPIO2Driverroutines

Message #

Driver ERROR: GPIO_CLX_RegisterClient() returned status:%1

Fields #

NameDescription
Status UInt32NTSTATUS reference

Event ID 1015: DriverUnload Start

#
Channel
Performance
Task
iaLPSS_GPIO2Driverroutines
Opcode
Start

Event ID 1016: DriverUnload End

#
Channel
Performance
Task
iaLPSS_GPIO2Driverroutines
Opcode
Stop

Event ID 1017: Driver ERROR: GPIO_CLX_UnregisterClient() returned status:Status.

#
Channel
Debug
Task
iaLPSS_GPIO2Driverroutines

Message #

Driver ERROR: GPIO_CLX_UnregisterClient() returned status:%1

Fields #

NameDescription
Status UInt32NTSTATUS reference

Event ID 1018: Driver ERROR: CheckSupportedOs() returned status:Status.

#
Channel
Debug
Task
iaLPSS_GPIO2Driverroutines

Message #

Driver ERROR: CheckSupportedOs() returned status:%1

Fields #

NameDescription
Status UInt32NTSTATUS reference

Event ID 1021: DeviceAdd Start

#
Channel
Performance
Task
iaLPSS_GPIO2Driverroutines
Opcode
Start

Event ID 1022: DeviceAdd End

#
Channel
Performance
Task
iaLPSS_GPIO2Driverroutines
Opcode
Stop

Event ID 1023: Device ERROR: GPIO_CLX_ProcessAddDevicePreDeviceCreate() returned status:Status.

#
Channel
Debug
Task
iaLPSS_GPIO2Driverroutines

Message #

Device ERROR: GPIO_CLX_ProcessAddDevicePreDeviceCreate() returned status:%1

Fields #

NameDescription
Status UInt32NTSTATUS reference

Event ID 1024: Device ERROR: GPIO_CLX_ProcessAddDevicePostDeviceCreate() returned status:Status.

#
Channel
Debug
Task
iaLPSS_GPIO2Driverroutines

Message #

Device ERROR: GPIO_CLX_ProcessAddDevicePostDeviceCreate() returned status:%1

Fields #

NameDescription
Status UInt32NTSTATUS reference

Event ID 1025: Device ERROR: WdfDeviceCreate() returned status:Status.

#
Channel
Debug
Task
iaLPSS_GPIO2Driverroutines

Message #

Device ERROR: WdfDeviceCreate() returned status:%1

Fields #

NameDescription
Status UInt32NTSTATUS reference

Event ID 1026: Device HW profile FOUND: Instance:Device_HW_profile_FOUND_Instance Version:Version Revision:Revision Mode:Mode.

#
Channel
Debug
Task
iaLPSS_GPIO2Driverroutines

Message #

Device HW profile FOUND: Instance:%1 Version:%2 Revision:%3 Mode:%4

Fields #

NameDescription
Instance UInt32
Version UInt32
Revision UInt32
Mode UInt32

Event ID 1027: Device HW profile ERROR: Instance:Device_HW_profile_ERROR_Instance Version:Version Revision:Revision Mode:Mode.

#
Channel
Debug
Task
iaLPSS_GPIO2Driverroutines

Message #

Device HW profile ERROR: Instance:%1 Version:%2 Revision:%3 Mode:%4

Fields #

NameDescription
Instance UInt32
Version UInt32
Revision UInt32
Mode UInt32

Event ID 1031: GpioCx DDI: GpioCx_DDI.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioCxDDIcalls

Message #

GpioCx DDI: %1

Fields #

NameDescription
Message AnsiString

Event ID 1032: GpioCx DDI ERROR: Controller Context invalid

#
Channel
Debug
Task
iaLPSS_GPIO2GpioCxDDIcalls

Event ID 1033: GpioCx DDI ERROR: Controller Object invalid

#
Channel
Debug
Task
iaLPSS_GPIO2GpioCxDDIcalls

Event ID 1034: GpioCx DDI ERROR: Controller Object allocate error

#
Channel
Debug
Task
iaLPSS_GPIO2GpioCxDDIcalls

Event ID 1101: ERROR: Invalid bank number: ERROR_Invalid_bank_number.

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Message #

ERROR: Invalid bank number: %1

Fields #

NameDescription
BankNo UInt32

Event ID 1102: BankName: ERROR: Invalid pin number: PinNo.

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Message #

%1: ERROR: Invalid pin number: %2

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Event ID 1103: BankName_PinNo: ERROR: Invalid pin ownership: PinOwnership.

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Message #

%1_%2: ERROR: Invalid pin ownership: %3

Fields #

NameDescription
BankName AnsiString
PinNo UInt32
PinOwnership UInt32

Event ID 1104: BankName_PinNo: ERROR: Invalid pin mode: PinMode.

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Message #

%1_%2: ERROR: Invalid pin mode: %3

Fields #

NameDescription
BankName AnsiString
PinNo UInt32
PinMode UInt32

Event ID 1107: PrepareController Start

#
Channel
Performance
Task
iaLPSS_GPIO2Controllerroutines
Opcode
Start

Event ID 1108: PrepareController End

#
Channel
Performance
Task
iaLPSS_GPIO2Controllerroutines
Opcode
Stop

Event ID 1109: PrepareController ERROR: Can't allocate pin table

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Event ID 1110: PrepareController ERROR: Can't initialize GPIO layout - STATUS:Status.

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Message #

PrepareController ERROR: Can't initialize GPIO layout - STATUS:%1

Fields #

NameDescription
Status UInt32NTSTATUS reference

Event ID 1111: PrepareController MBARLEN mapped: PA:VA LEN:MBAR VA:PA.

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Message #

PrepareController MBAR%1 mapped: PA:%2 LEN:%3 VA:%4

Fields #

NameDescription
MBAR UInt32
PA UInt64
LEN UInt321 mapped: PA.
VA Pointer

Event ID 1112: PrepareController ERROR: Too many MBAR resources IDX:MBAR PA:PA LEN:LEN - STATUS:Status.

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Message #

PrepareController ERROR: Too many MBAR resources IDX:%1 PA:%2 LEN:%3 - STATUS:%4

Fields #

NameDescription
MBAR UInt32
PA UInt64
LEN UInt32
Status UInt32NTSTATUS reference

Event ID 1113: PrepareController ERROR: Can't map MMIO for MBARLEN PA:STATUS LEN:MBAR - STATUS:PA.

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Message #

PrepareController ERROR: Can't map MMIO for MBAR%1 PA:%2 LEN:%3 - STATUS:%4

Fields #

NameDescription
MBAR UInt32
PA UInt64
LEN UInt321 PA.
Status UInt32NTSTATUS reference

Event ID 1114: PrepareController INTERRUPT VEC:PrepareController_INTERRUPT_VEC.

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Message #

PrepareController INTERRUPT VEC:%1

Fields #

NameDescription
Vector UInt32

Event ID 1115: PrepareController ERROR: Incorrect resource count.

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Description

PrepareController ERROR: Incorrect resource count. MMIO:MBAR_current (exp. MBAR_expected) INT:INT_current (exp. INT_expected) - STATUS:Status.

Message #

PrepareController ERROR: Incorrect resource count. MMIO:%1 (exp. %2) INT:%3 (exp. %4) - STATUS:%5

Fields #

NameDescription
MBAR_current UInt32
MBAR_expected UInt32
INT_current UInt32
INT_expected UInt32
Status UInt32NTSTATUS reference

Event ID 1116: ReleaseController Start

#
Channel
Performance
Task
iaLPSS_GPIO2Controllerroutines
Opcode
Start

Event ID 1117: ReleaseController End

#
Channel
Performance
Task
iaLPSS_GPIO2Controllerroutines
Opcode
Stop

Event ID 1118: Controller queried for properties

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Event ID 1119: Controller started

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Event ID 1120: Controller stopped

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Event ID 1121: BankName_PinNo: ERROR: Interrupt configuration not supported: IntMode IntPolartity.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIntroutines

Message #

%1_%2: ERROR: Interrupt configuration not supported: %3 %4

Fields #

NameDescription
BankName AnsiString
PinNo UInt32
IntMode UInt32
IntPolartity UInt32

Event ID 1122: BankName_PinNo: Interrupt configured to: IntMode IntPolartity.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIntroutines

Message #

%1_%2: Interrupt configured to: %3 %4

Fields #

NameDescription
BankName AnsiString
PinNo UInt32
IntMode UInt32
IntPolartity UInt32

Event ID 1123: BankName_PinNo: WARNING: Pull configuration not supported: PullMode - using default.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIntroutines

Message #

%1_%2: WARNING: Pull configuration not supported: %3 - using default

Fields #

NameDescription
BankName AnsiString
PinNo UInt32
PullMode UInt32

Event ID 1124: BankName_PinNo: Pull configured to: PullMode.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIntroutines

Message #

%1_%2: Pull configured to: %3

Fields #

NameDescription
BankName AnsiString
PinNo UInt32
PullMode UInt32

Event ID 1125: BankName_PinNo: Interrupt enabled.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIntroutines

Message #

%1_%2: Interrupt enabled

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Event ID 1126: BankName_PinNo: Interrupt disabled.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIntroutines

Message #

%1_%2: Interrupt disabled

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Event ID 1127: requested: Interrupts mask set to:failed (requested:BankName, failed:MaskSet).

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIntroutines

Message #

%1: Interrupts mask set to:%2 (requested:%3, failed:%4)

Fields #

NameDescription
BankName AnsiString
MaskSet UInt32
MaskRequested UInt32
MaskFailed UInt32

Event ID 1128: BankName_PinNo: Interrupt unmasked.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIntroutines

Message #

%1_%2: Interrupt unmasked

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Event ID 1129: raw: Interrupts queried active:mask (raw:BankName, mask:Active).

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIntroutines

Message #

%1: Interrupts queried active:%2 (raw:%3, mask:%4)

Fields #

NameDescription
BankName AnsiString
Active UInt32
ActiveRaw UInt32
ActiveMask UInt32

Event ID 1130: BankName: Interrupts queried enabled:Enabled.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIntroutines

Message #

%1: Interrupts queried enabled:%2

Fields #

NameDescription
BankName AnsiString
Enabled UInt32

Event ID 1131: requested: Interrupts status cleared with mask:failed (requested:BankName, failed:MaskSet).

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIntroutines

Message #

%1: Interrupts status cleared with mask:%2 (requested:%3, failed:%4)

Fields #

NameDescription
BankName AnsiString
MaskSet UInt32
MaskRequested UInt32
MaskFailed UInt32

Event ID 1132: BankName_PinNo: ERROR: Pin already connected in mode PinIoMode.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIoroutines

Message #

%1_%2: ERROR: Pin already connected in mode %3

Fields #

NameDescription
BankName AnsiString
PinNo UInt32
PinIoMode UInt32

Event ID 1133: BankName_PinNo: ERROR: Pin not connected.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIoroutines

Message #

%1_%2: ERROR: Pin not connected

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Event ID 1134: BankName_PinNo: Pin output set PinState.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIoroutines

Message #

%1_%2: Pin output set %3

Fields #

NameDescription
BankName AnsiString
PinNo UInt32
PinState UInt32

Event ID 1135: BankName_PinNo: Pin output pre-set PinState.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIoroutines

Message #

%1_%2: Pin output pre-set %3

Fields #

NameDescription
BankName AnsiString
PinNo UInt32
PinState UInt32

Event ID 1136: BankName_PinNo: Pin input get PinState.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIoroutines

Message #

%1_%2: Pin input get %3

Fields #

NameDescription
BankName AnsiString
PinNo UInt32
PinState UInt32

Event ID 1137: BankName_PinNo: WARNING: Pin mode 'PinIoMode' not supported.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIoroutines

Description

BankName_PinNo: WARNING: Pin mode 'PinIoMode' not supported. Buffer enable state not changed.

Message #

%1_%2: WARNING: Pin mode '%3' not supported. Buffer enable state not changed.

Fields #

NameDescription
BankName AnsiString
PinNo UInt32
PinIoMode UInt32

Event ID 1138: BankName_PinNo: Pin connected in mode PinIoMode.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIoroutines

Message #

%1_%2: Pin connected in mode %3

Fields #

NameDescription
BankName AnsiString
PinNo UInt32
PinIoMode UInt32

Event ID 1139: BankName_PinNo: ERROR: Pin connected in mode PinIoModeCurrent while disconnect request for mode PinIoModeRequested.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIoroutines

Message #

%1_%2: ERROR: Pin connected in mode %3 while disconnect request for mode %4

Fields #

NameDescription
BankName AnsiString
PinNo UInt32
PinIoModeCurrent UInt32
PinIoModeRequested UInt32

Event ID 1140: BankName_PinNo: Pin disconnected - output buffer disabled.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIoroutines

Message #

%1_%2: Pin disconnected - output buffer disabled

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Event ID 1141: BankName_PinNo: Pin disconnected - output buffer left enabled.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIoroutines

Message #

%1_%2: Pin disconnected - output buffer left enabled

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Event ID 1142: BankName_PinNo: Pin disconnected - input buffer disabled.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIoroutines

Message #

%1_%2: Pin disconnected - input buffer disabled

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Event ID 1143: BankName_PinNo: Pin disconnected - input buffer left enabled.

#
Channel
Debug
Opcode
Info

Message #

%1_%2: Pin disconnected - input buffer left enabled

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Event ID 1144: BankName_PinNo: WARNING: Pin mode 'PinIoMode' not supported.

#
Channel
Debug
Opcode
Info

Description

BankName_PinNo: WARNING: Pin mode 'PinIoMode' not supported. Disconnecting input and output.

Message #

%1_%2: WARNING: Pin mode '%3' not supported. Disconnecting input and output.

Fields #

NameDescription
BankName AnsiString
PinNo UInt32
PinIoMode UInt32

Event ID 1150: BankName_PinNo: Pin context restored.

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Message #

%1_%2: Pin context restored

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Event ID 1151: BankName: Bank context restored.

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Message #

%1: Bank context restored

Fields #

NameDescription
BankName AnsiString

Event ID 1152: BankName_PinNo: Pin context saved.

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Message #

%1_%2: Pin context saved

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Event ID 1153: BankName: Bank context saved.

#
Channel
Debug
Task
iaLPSS_GPIO2Controllerroutines

Message #

%1: Bank context saved

Fields #

NameDescription
BankName AnsiString

Event ID 1200: ERROR: Invalid special function number

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIntroutines

Event ID 1201: BankName_PinNo: Mask APIC interrupt.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIntroutines

Message #

%1_%2: Mask APIC interrupt

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Event ID 1202: BankName_PinNo: Unmask APIC interrupt.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIntroutines

Message #

%1_%2: Unmask APIC interrupt

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Event ID 1203: BankName_PinNo: WriteGpioIo.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIoroutines

Message #

%1_%2: WriteGpioIo

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Event ID 1204: BankName_PinNo: ReadGpioIo.

#
Channel
Debug
Task
iaLPSS_GPIO2GpioIoroutines

Message #

%1_%2: ReadGpioIo

Fields #

NameDescription
BankName AnsiString
PinNo UInt32

Provenance

ETW provider GUID 63848cff-3ec7-4ddf-8072-5f95e8c8eb98

Defined in iaLPSS2i_GPIO2.sys, the binary that emits these events.

  • Win11-26200.6584, schema read from the registered manifest, binary version 30.100.1816.3, captured 2026-06-02 — Manifest XML pack, 2.0 MB