Microsoft-Windows-DataCenterBridging

Event	Title	Channel	Sample	Rule
1	The driver has started.	Operational	N	N
2	The driver has stopped.	Operational	N	N
3	Failed to configure network interface "ifAlias" with status code NtStatus.	Operational	N	N
4	Failed to configure network interface "ifAlias" with status code NdisPort.	Operational	N	N
5	One or more application priorities are unenforceable on network interface …	Operational	N	N
6	Too many DCBX neighbors detected on network interface "ifAlias".	Operational	N	N
7	Remote port connected to network interface "ifAlias" failed to renew DCBX TLVs.	Operational	N	N
8	The number of TCs supported by network interface "ifAlias" is less than the …	Operational	N	N
9	The number of ETS-capable TCs supported by network interface "ifAlias" is less …	Operational	N	N
10	The network interface "ifAlias" does not support the strict priority …	Operational	N	N
11	The number of PFC-enabled TCs supported by network interface "ifAlias" is less …	Operational	N	N
12	DCB not supported on network interface "ifAlias".	Operational	N	N
13	Failed to persist settings.	Operational	N	N

Event ID 1: The driver has started.

Channel: Operational
Opcode: Start

Event ID 2: The driver has stopped.

Channel: Operational
Opcode: Stop

Event ID 3: Failed to configure network interface "ifAlias" with status code NtStatus.

Channel: Operational

Message #

Failed to configure network interface "%1" with status code %3.

Fields #

Name	Description
`ifAlias` UnicodeString
`ifName` UInt64
`NtStatus` UInt32

Event ID 4: Failed to configure network interface "ifAlias" with status code NdisPort.

Channel: Operational

Description

Failed to configure network interface "ifAlias" with status code NdisPort. Additional details are available.

Message #

Failed to configure network interface "%1" with status code %3. Additional details are available.

Fields #

Name	Description
`ifAlias` UnicodeString
`ifName` UInt64
`NdisPort` UInt32
`NtStatus` UInt32
`ConfigurationLength` UInt32
`Configuration` Binary

Event ID 5: One or more application priorities are unenforceable on network interface "ifAlias".

Channel: Operational

Description

One or more application priorities are unenforceable on network interface "ifAlias". Additional details are available.

Message #

One or more application priorities are unenforceable on network interface "%1". Additional details are available.

Fields #

Name	Description
`ifAlias` UnicodeString
`ifName` UInt64

Event ID 6: Too many DCBX neighbors detected on network interface "ifAlias".

Channel: Operational

Message #

Too many DCBX neighbors detected on network interface "%1".

Fields #

Name	Description
`ifAlias` UnicodeString
`ifName` UInt64

Event ID 7: Remote port connected to network interface "ifAlias" failed to renew DCBX TLVs.

Channel: Operational

Message #

Remote port connected to network interface "%1" failed to renew DCBX TLVs.
	Remote MAC address: %3
	Remote Chassis ID: %6

Fields #

Name	Description
`ifAlias` UnicodeString
`ifName` UInt64
`RemoteMacAddress` AnsiString
`RemoteChassisIdType` UInt8
`RemoteChassisIdLength` UInt32
`RemoteChassisId` Binary
`RemotePortIdType` UInt8
`RemotePortIdLength` UInt32
`RemotePortId` Binary
`RemoteTtl` UInt32

Event ID 8: The number of TCs supported by network interface "ifAlias" is less than the number used by Source policy.

Channel: Operational

Message #

The number of TCs supported by network interface "%1" is less than the number used by %3 policy.
	TCs used: %4
	TCs supported: %5
Additional details are available.

DCB is now disabled for the network interface.

Fields #

Name	Description
`ifAlias` UnicodeString
`ifName` UInt64
`Source` UInt32
`TcsUsed` UInt32
`MaxTcs` UInt32

Event ID 9: The number of ETS-capable TCs supported by network interface "ifAlias" is less than the number used by Source policy.

Channel: Operational

Message #

The number of ETS-capable TCs supported by network interface "%1" is less than the number used by %3 policy.
	ETS-capable TCs used: %4
	ETS-capable TCs supported: %5
Additional details are available.



DCB is now disabled for the network interface.

Fields #

Name	Description
`ifAlias` UnicodeString
`ifName` UInt64
`Source` UInt32
`TcsUsed` UInt32
`MaxTcs` UInt32

Event ID 10: The network interface "ifAlias" does not support the strict priority transmission selection algorithm but the Source policy specifies its usage.

Channel: Operational

Description

The network interface "ifAlias" does not support the strict priority transmission selection algorithm but the Source policy specifies its usage. Additional details are available.

Message #

The network interface "%1" does not support the strict priority transmission selection algorithm but the %3 policy specifies its usage. Additional details are available.

DCB is now disabled for the network interface.

Fields #

Name	Description
`ifAlias` UnicodeString
`ifName` UInt64
`Source` UInt32
`TcsUsed` UInt32
`TsaAssignmentTableLength` UInt32
`TsaAssignmentTable` Binary

Event ID 11: The number of PFC-enabled TCs supported by network interface "ifAlias" is less than the number used by Source policy.

Channel: Operational

Message #

The number of PFC-enabled TCs supported by network interface "%1" is less than the number used by %3 policy.
	PFC-enabled TCs used: %4
	PFC-enabled TCs supported: %5
Additional details are available.

DCB is now disabled for the network interface.

Fields #

Name	Description
`ifAlias` UnicodeString
`ifName` UInt64
`Source` UInt32
`TcsUsed` UInt32
`MaxTcs` UInt32
`PfcEnable` UInt8

Event ID 12: DCB not supported on network interface "ifAlias".

Channel: Operational

Description

DCB not supported on network interface "ifAlias". Additional details are available.

Message #

DCB not supported on network interface "%1". Additional details are available.

Fields #

Name	Description
`ifAlias` UnicodeString
`ifName` UInt64
`Flags` UInt32

Event ID 13: Failed to persist settings.

Channel: Operational

Description

Failed to persist settings. Error code: NtStatus.

Message #

Failed to persist settings. Error code: %1.

Fields #

Name	Description
`NtStatus` UInt32